september 23, 2009 datatronic: 28151 highway 74, romoland, ca 92585 tel: 951-928-7700 fax: 951-928-7701 email: ddisales@datatronics.com 499 king?s road, hong kong tel: (852) 2562 3858, (852) 2564 8477 fax: (852) 2565 7214, (852) 2563 1290 all specifications are subj ect to change without notice. electrical specifications at 25oc part no. inductance ( ? h) ? 30% dcr ( ? ) max. i rated (a) max. dr358-5-302 3.0 0.024 3.00 dr358-5-392 3.9 0.027 2.60 dr358-5-502 5.0 0.031 2.40 dr358-5-602 6.0 0.035 2.25 dr358-5-732 7.3 0.054 2.10 dr358-5-862 8.6 0.058 1.85 dr358-5-103 10.0 0.065 1.70 dr358-5-123 12.0 0.070 1.55 dr358-5-153 15.0 0.084 1.40 dr358-5-183 18.0 0.095 1.32 DR358-5-223 22.0 0.128 1.20 dr358-5-273 27.0 0.142 1.05 dr358-5-333 33.0 0.165 0.97 dr358-5-393 39.0 0.210 0.86 dr358-5-473 47.0 0.238 0.80 dr358-5-563 56.0 0.277 0.73 dr358-5-683 68.0 0.304 0.65 dr358-5-823 82.0 0.390 0.60 dr358-5-104 100.0 0.535 0.54 mechanical outlines notes : 1. all dimensions are shown in millimeter ?mm? 2. general tolerance ? 0.2mm, unless other specified 3. inductance test: 10khz, 0.1vrms 4. i rated for an approximate 40 ? c temperature rise 5. i rated for an approximate 35% drop maximum of the initial value 6. tape and reel quantity, 1500 pcs/ 13? reel 7. for non-rohs parts replace dr prefix with 42- (e.g. dr358-5 becomes 42-358-5) 8. terminal finish is compliant to rohs requi rements. solder in accordance with j-std-020d smd shielded inductor dr358-5 series features ? low profile surface mount design ? flat top for pick and place ? inductance range from 3.0h to 100.0h ? operating temp. -20c to +80c ? tinned leads with leaded solder is available (note 7)
|
